Filter
Top Products
Solving Problems with Media Misfeeds
107
Media is
misfeeding.
Transparencies have
collected static elec-
tricity in the tray.
Remove the transparencies and load
them in Tray 1 one sheet at a time. Do
not fan transparencies before loading
them.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
Use KONICA MINOLTA-approved
media.
See “Media Specifications” on page
42.
The media feed roller
is dirty.
Clean the media feed roller.
For more details, refer to “Interior” on
page 85.
Symptom Cause Solution