Filter
Top Products
Dual In-Line Memory Module (DIMM)
127
Dual In-Line Memory Module (DIMM)
A dual in-line memory module (or DIMM) is a compact circuit board with sur-
face-mount memory chips.
Your printer comes with 64 MB SDRAM printer memory on board. However,
you can upgrade to a maximum of 576 MB of RAM through the installation
of an additional unbuffered SDRAM DIMM. Your printer comes with one free
DIMM slot.
DIMM’s Specifications
!"
Your printer recognizes only single-sided DIMMs. If you install a dou-
ble-sided DIMMs, the printer may recognize only half of the memory
available on that DIMMs.
Recommended DIMMs
1) 128 MB DIMM - CT16M64S4D7E(Crucial)
2) 256 MB DIMM - VS133-S256/HB(Buffalo)
3) 512 MB DIMM - 0286-0005(Centon)
!"
For details on the available DIMMs, refer to printer.konicaminolta.com.
Capacity
128 MB, 256 MB, 512 MB
Module Type
unbuffered NonECC
Pin Count
168-pin
Configuration
16M x 64bit, 32M x 64bit, 64M x 64bit
Data Rate
100 MHz, 133 MHz
CAS Latency
3
Voltage
3.3 V