Filter
Top Products
Solving Other Problems
109
Images
cannot be
printed from
the digital
camera.
The digital camera
transfer mode is not
set to PictBridge.
!"
Printer only
supports a
PictBridge
compliant
digital camera.
Set the digital camera transfer mode to
PictBridge.
Printing
takes too
much time.
The printer is set to a
slow printing mode
(for example, thick
stock or transpar-
ency).
It takes more time to print with special
media. When using regular paper,
make sure that the media type is set
properly in the driver.
The printer is set to
power saving mode.
It takes time for printing to start in
power saving mode. If you do not want
to use this mode, disable it. (
ENGINE
/
SERVICE
/
ENERGY
SAVER
menu)
The job is very com-
plex.
Wait. No action needed.
The printer memory is
insufficient.
Add more memory.
A toner cartridge for a
different region is
installed (
INCOR-
RECT CART. X
is
displayed in the mes-
sage window).
Install a correct KONICA MINOLTA
toner cartridge approved for your spe-
cific printer.
Blank pages
are printed.
One or more of the
toner cartridges are
defective or empty.
Check the toner cartridges. The image
will not print correctly or not at all, if the
cartridges are empty.
The wrong media is
being used.
Check that the media type set in the
driver matches the media loaded in the
printer.
Symptom Cause Solution