Filter
Top Products
Configuration Menu Overview
33
FORCED
MODES
Settings
AUTO/AUTO/ON / AUTO/FULL/ON /
AUTO/HALF/ON / 100M/AUTO/ON /
100M/FULL/ON / 100M/FULL/OFF /
100M/HALF/ON / 100M/HALF/OFF /
10M/AUTO/ON / 10M/FULL/ON /
10M/FULL/OFF / 10M/HALF/ON /
10M/HALF/OFF
Some network hubs will not communicate with printers that
use a fixed network speed and structure. In such cases, use
the new
NETWORK/FORCED MODES menu to configure the
printer for the appropriate hub settings and enable communi-
cation.
# The first value indicates the network transmission speed
(
SPEED). Select from a 10Base-T connection (10M),
100Base-TX connection (
100M), or automatic recognition
(
AUTO). If AUTO is selected, the transmission speed is set
depending on the negotiation; therefore, there is no setting
where negotiation is turned off.
# The second value indicates the communication method for
bi-directional communication (
DUP
). Select whether data is
sent and received in both directions simultaneously (
FULL)
or in one direction at a time (
HALF), or select automatic
recognition (
AUTO). If AUTO is selected, the transmission
speed is set depending on the negotiation; therefore, there
is no setting where negotiation is turned off.
# The third value indicates the negotiation (
NEG.
) setting
(mutually sends and receives information such as the
transmission speed and determines the transmission set-
ting). When set to
ON, negotiation is performed. When set
to
OFF, negotiation is not performed.