Filter
Top Products
Making Basic Copies5-2
Making Basic Copies
This section contains descriptions of the basic copy operation procedure and
the functions that are frequently used when making copies, such as specify-
ing the zoom ratio and the copy density.
" Before making copies, check that the Copy key is lit up in green. If the
key is not lit up in green, press the Copy key to enter Copy mode.
" The default paper size setting can be changed with TRAY1 PAPER
SETUP
in the UTILITY menu. For details, refer to “TRAY1 PAPER
SETUP Menu” on page 2-26.
If, while specifying settings, no key is pressed for the length of time specified
for
AUTO PANEL RESET, the entered settings are canceled and the main
screen (Copy mode) is displayed.
Basic Copy Operation
1 Position the document to be
copied.
" For details on positioning
the document, refer to
“Placing a document on
the original glass” on
page 3-28 and “Loading
a document into the ADF”
on page 3-29.