Filter
Top Products
Scanning With the Machine 6-15
Selecting From the Address Book
The speed dial destinations and group dial destinations registered on this
machine are saved in the address book. Follow the procedure described
below to specify an address (e-mail address, FTP address or SMB address)
from the address book as the recipient of the scan data.
" This feature is available only if data has been registered in the
address book.
1 With the main screen or Can Use AddressBook displayed, press the
AddressBook key four times so that PHONE BOOK appears.
2 Press the + or , key to select LIST, and then press the Select key.
A list of the address book contents appears.
3 Press the + or , key to select the desired data, and then press the Select
key.
4 Press the Select key again.
If an FTP address or an SMB address was selected, the destination
address is specified.
5 If an e-mail address was selected, press the + or , key to select FIN-
ISH
, and then press the Select key.
" To add an additional e-mail address, select ADD in step 5, and
then specify the destination. When sending the data to an FTP
address or SMB address, multiple addresses cannot be specified.
To check the specified e-mail address, select
CHECK/EDIT in
step 5. To delete an address, select CHECK/EDIT in step 5, and
then continue with step 2 of “Deleting a Specified Destination
Address”.
Searching the Address Book
The destination address (e-mail address, FTP address or SMB address)
where the scan data is to be sent can be specified by searching the address
book.
" This feature is available only if data has been registered in the
address book.
1 With the main screen (Scan mode) or Can Use AddressBook dis-
played, press the AddressBook key four times so that PHONE BOOK
appears.
2 Press the + or , key to select SEARCH, and then press the Select key.
3 Use the keypad to type in the search keyword (maximum of 10 charac-
ters), and then press the Select key.