Filter
Top Products
Section 7 COPIER MANAGEMENT FUNCTIONS
7-72
● Default magnification ratio
Perform the following procedure to set whether or not the appropriate
magnification ratio to be calculated automatically when you select the
size of copy paper.
1
Display the “Copy default” screen.
(See “(5) Accessing the copy default settings” on page 7-62.)
Inch specifications
Default setting
Copy
default
Machine
default
Language Management
End
BOX
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter
Metric specifications
Default setting
Copy
default
Machine
default
Language Management
End
Hard Disk
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter
2
Select “Default magnification” [“Default mode”] in the settings
list on the left side of the touch panel and then touch the
“Change #” key.
The “Default magnification” [“Default mode”] screen will be
displayed.
Inch specifications
Copy default
Select paper
Select paper type(APS)
Default drawer
Drawer for cover paper
Default magnification
APS
Plain
1st paper
Bypass
Manual
Up
Change #
Close
Default setting
Default menu Setting mode
Down
Default setting / Counter
Metric specifications
Copy default
Select paper
Select paper type(APS)
Default cassette
Cassette for cover paper
Default mode
APS
Plain
1st paper
Bypass
Manual
Up
Change #
Close
Default setting
Default menu Setting mode
Down
Default setting / Counter
3
Touch the “Manual” key or the “AMS” key, as appropriate.
Inch specifications
Select default magnification mode.
Manual
AMS
Default magnification
Default setting - Copy default
CloseBack
Metric specifications
Select default zoom mode.
Back
Close
Manual
AMS
Default mode
Default setting - Copy default
NOTE
If you want to quit the displayed setting without changing it, touch the
“Back” key. The touch panel will return to the screen in step 2.
4
Touch the “Close” key. The touch panel will return to the
screen in step 2.
5
Touch the “Close” key once again. The touch panel will return
to the “Default setting”screen.
6
Touch the “End” key. The touch panel will return to the
contents of the “Basic” tab.