Kyocera 4035 All in One Printer User Manual


 
4-4
4. Selecting the Printer Settings
Selecting the serial interface settings
Select Serial tab.
Use the and cursor keys to select the desired item and then
touch the Change key. The setting screen for the selected item will
appear.
Baud rate: Sets the Baud Rate 3.
Data Bits: Sets the data bit length 4.
Stop Bits: Sets the stop bit length 5.
Parity: Sets the parity 6.
Protocol: Sets the protocol 7.
Select the desired setting for each item and then touch the Close
key. The display will return to the [Interface] screen.
3
Selecting the network interface
Select Network tab.
Use the and cursor keys to select the desired item and then
touch the Change key. The setting screen for the selected item will
appear.
Netware: Turns NetWare On/Off 8 and selects the
NetWare Frame type 9.
TCP/IP: Turns TCP/IP On/Off 0, DHCP On/Off! and
sets the IP address @, Subnet Mask # and
the Gateway address $.
Ether talk: Selects the Ether Talk setting %.
Option Status Page: Selects the setting for the Network Card Status
Page print out ^.
1
2
1
2