ix
About the Operation Guide
This Operation Guide contains the following chapters:
1 Machine Parts
This chapter lists the names of different machine parts.
2Preparation
This chapter explains how to start up the machine, load paper and originals, and use the application software included in
the Product Library disc.
3Copying
This chapter explains the functions you can use when copying.
4Printing
This chapter explains the printing procedure from an application software.
5 Scanning
This chapter explains the functions you can use when scanning originals.
6 Maintenance
This chapter explains how to replace the toner container and how to care for your machine.
7 Troubleshooting
This chapter explains how to handle machine problems that may occur, such as paper jams.
8 Appendix
This chapter lists the machine specifications.
Conventions in This Guide
This manual uses the following conventions.
Convention
Description Example
Italic Typeface Used to emphasize a key word, phrase
or reference to additional information.
Refer to Connections on page 2-2.
Bold Used to denote buttons on the
software.
To start printing, click OK.
Bracket Bold Used to denote operation panel keys. Press [Start] to start copying.
Courier Indicates characters entered in the
display on the operation panel.
1- appears in the display on the operation panel.
Note Used to provide additional or useful
information about a function or feature.
Note Do not remove the toner container from the
carton until you are ready to install it in the machine.
Important Used to provide important information.
IMPORTANT Take care not to touch the drum and
transfer roller (black) during cleaning.
Caution Used to suggest mechanical damage
as a result of an action.
CAUTION When removing a paper jam, pull the paper
gently so as not to tear it. Torn pieces of paper are difficult
to remove and may be easily overlooked, deterring the
paper jam recovery.
Warning Used to alert users to the possibility of
personal injury.
WARNING If you are shipping the machine, remove and
pack the developer unit and drum unit in a plastic bag and
ship them separately from the machine.