Filter
Top Products
2-28
Preparation
Default and Program Settings
This section explains about the Copy, Print Box, and Scan default settings and programs. For settings that are frequently
changed from the default settings, it is convenient to register a program.
Default Settings
This section explains the default settings for each function.
Program Settings
If you have settings that are frequently changed from the default settings, register the settings in a program. You can
simply select the program number as needed to recall those functions.
Programs can be registered from a computer using Preset Tool. The Preset Tool is a function of KYOCERA Client Tool.
Three programs can be registered per function.
This section explains how to register a program. To use a registered program, refer to the pages of each function.
• Copy: Basic Operation on page 3-2
• Scan: Push Scan on page 5-2
• Print Box: Printing from Print Box on page 4-6
Accessing the Preset Tool
1 Start KYOCERA Client Tool as explained in Accessing KYOCERA Client Tool on
page 2-22.
2 Click Preset on the Device tab. The Preset Tool opens.
Functions Description
Copy The default settings for Copy are changed with the Configuration. For details, refer to
Configuration on page 2-36.
Print Box It is not possible to change the default settings for Print Box. The job stored in the Default
folder is printed. The Program is used to select the Print Box. Refer to Program Settings on
page 2-28.
Push Scan It is not possible to change the default settings for Push Scan. The Program is used to change
the settings. Refer to Program Settings on page 2-28.