Kyocera FS-1020MFP All in One Printer User Manual


 
7-8
Troubleshooting
E-0008 Cover open The rear cover or front cover is
open.
Close the rear cover or front cover.
E-0009 Inner tray full The inner tray is full of paper. The machine pauses after 100 sheets are
printed. Remove paper from the inner
tray and press [Start] to resume printing.
E-0012 Memory overflow Unable to continue the job as the
memory is used up.
Change the print resolution from Fast
1200 to 600 dpi. Refer to Printer Driver
User Guide.
E-0014 Add paper The paper size in the paper source
is different from the printer driver or
KYOCERA Client Tool setting.
Load the proper size of paper in the
paper source.
E-0015 The USB cable is not connected. Press [Stop/Reset] and connect the
USB cable.
The PC is powered off. Press [Stop/Reset] and turn the PC
power on.
Cannot find KYOCERA Client Tool. Press [Stop/Reset] and open KYOCERA
Client Tool.
Not connected. The USB cable is not connected. Connect the USB cable.
The machine is powered off. Turn the machine power on.
Cannot find the appropriate driver. Install the appropriate driver.
E-0018 The file does not exist in Print Box. Press [Stop/Reset].
E-0019 The machine cannot run this
program due to unusable original
size is registered in the program.
Press [Stop/Reset] and change the
program settings.
J-0511 Paper jam A paper jam has occurred in the
rear cover.
Refer to Clearing Paper Jams on
page 7-9 and remove the jammed paper.
PF Add paper A paper jam has occurred in the
cassette.
Refer to Clearing Paper Jams on
page 7-9 and remove the jammed paper.
There is no paper in the paper
source.
Load paper into the paper source.
Toner is running out. It is almost time to replace the
toner container.
Obtain a new toner container.
Replacing the
Maintenance Kit
Replacement of the maintenance
kit is necessary at every 100,000
images of printing.
Replace Maintenance Kit.
* Events for which the Status Monitor provides notification can be set in the Configuration. Refer to Configuration
on page 2-36.
Error Code
Message displayed in
KYOCERA Client Tool
and Status Monitor*
Meaning Remedy