Kyocera FS1750 Printer User Manual


 
1.4. Setting Up and Interfacing
1-16
13—Install the printer driver
Printer drivers are provided for using the printer with Windows 95, Windows 98, or Windows 3.1. Use the
Kyocera Digital Library CD-ROM supplied with the printer. To install the printer driver, proceed as follows.
Reference to the Windows manual is also recommended.
Windows 95/Windows 98
The automatic installation screen appears when the CD-ROM for the printer is inserted into the computer,
if the computer is set for CD auto-run. Proceed with the installation according to the instructions that appear
on the screen. Read the explanation below for information about the main screens during installation.
Select FS-3750 or FS-1750 from this screen.
The types of drivers are shown below. Select the driver that you need. (When you click an explanation
appears below the box.
Depending on the computer, installation screens may not appear. If this happens, install the printer driver
according to the procedure below.