Filter
Top Products
Section 4 BASIC OPERATION
4-2
4. Selecting functions
Select from the copier’s various functions.
5. Selecting the paper size
When “APS” appears in the message display, paper of the same size
as the original will be automatically selected. Thus, if you want to
make copies onto paper of the same size as the originals with images
of the same size, no special settings are required. If you want to copy
the original image onto a different size paper without changing the
size of the image, press the Paper Select key and select the desired
size of paper, and then press the Manual key.
NOTE
It is also possible for you to specify one drawer that will be selected
automatically even without setting any originals. (See “@ Default
drawer (b/w)” on page 7-19 and “# Default drawer (color)” on
page 7-20.)
Inch specifications Metric specifications
4
Inch specifications Metric specifications
5
• Mono-color mode (Page 5-1.)
• Gloss mode (Page 5-2.)
• One-touch image quality adjustment (Page 5-3.)
• Adjusting the color balance (Page 5-4.)
• Adjusting the color hue (Page 5-5.)
• Adjusting the sharpness (Page 5-7.)
• Enlarging/reducing copies (Page 6-1.)
• Interrupt copying (Page 6-5.)
• Making duplex (2-sided) copies from various types of originals
(Page 6-6.) *
3
• Copying two-page originals onto separate sheets (Page 6-9.)
• Creating a margin on the copies (Page 6-11.) *
1
• Making copies with clean edges (Page 6-15.) *
1
• Inverting black and white AND colors (Page 6-17.)
• Making mirror image copies (Page 6-18.)
• Printing page numbers on copies (Page 6-19.) *
1
• Feeding paper as a backing sheet for OHP transparencies
(Page 6-21.) *
1
• Preparing presentation materials to go with transparencies
(Page 6-23.) *
1
• Adding covers and separation inserts to your copy sets
(Page 6-26.) *
1
• Making one copy from either two or four originals
(Page 6-32.) *
1
• Making booklets, etc., from sheet originals (Page 6-34.) *
3
• Making booklets, etc., from books (Page 6-36.) *
3
• Making both black & white AND color copies at the same time
(Page 6-38.) *
1
• Enlarging the image and printing it out onto multiple sheets
(Page 6-39.) *
1
• Copying different sized originals onto one size of copy paper
(Page 6-41.) *
1
• Memorizing frequently used settings (Page 6-43.)
• Confirming copy settings (Recall function) (Page 6-45.)
• Sorting automatically (Page 6-46.) *
1
• Rotate copy function (Page 6-47.) *
1
• Auto selection mode (Page 8-3.) *
2
*1:If you do not have a Memory Copy Board installed as
standard equipment, the optional Memory Copy Board must
be installed in your copier in order to use this mode.
*2:The optional DF must be installed in your copier in order to
use this mode.
*3:Only available in duplex copiers.