Filter
Top Products
Section 6 FUNCTIONS
6-28
(2) Making copies with the insert sheet modes
NOTES
• If your machine is a duplex copier, it is possible for you to make
duplex (2-sided) copies in this mode.
• 2-sided copies cannot be made automatically when paper is being
fed from the multi-bypass tray.
1
Press the Transparency Film / Card Stock key to light the
corresponding indicator.
2
Use the M cursor or the N cursor key to select “c Inserts
Mode” [“c INSERT MODE”].
Inch specifications
Metric specifications
3
Press the Enter key. The “Select original” screen will appear.
4
Use the M cursor or the N cursor key to specify the type of
originals being copied.
Select “z 1-sided” if you are using 1-sided originals and
“x 2-sided” if you are using 2-sided originals.
Inch specifications
Metric specifications
5
Press the Enter key.
• If your machine is a duplex copier, go to the next step
• If your machine is a standard copier, go directly to step 10.
6
Use the M cursor or the N cursor key to select the type of
finished copies you want to make.
Select “z 1-sided” if you want to make 1-sided copies and
“x 2-sided” if you want to make 2-sided copies.
Inch specifications
Metric specifications
7
Press the Enter key.
If you selected “z 1-sided” in step 4 and “x 2-sided” in
step 6, go to the next step. Otherwise, go directly to step 10.
8
Select whether you want the image that is copied onto the
back side of the copies to be rotated 180 degrees or not.
Inch specifications
Metric specifications
9
Press the Enter key.
10
Use the M cursor or the N cursor key to select the insert
sheet mode that you want to use.
Inch specifications
Metric specifications
Inch specifications Metric specifications