Filter
Top Products
8: Network Settings
EDS User Guide 49
Network 1 (eth0) Interface Configuration
This page shows the configuration settings for the Ethernet connection and lets you change these
settings.
To view and configure network interface settings:
1. Select Network on the menu bar, if you are not already in the Network web page.
2. Select Interface > Configuration submenus at the top of the page. The Network 1 (eth0)
Interface Configuration page appears.
Figure 8-2 Network 1 (eth0) Interface Configuration
3. Enter or modify the following settings:
Table 8-3 Network Interface Configuration
Network 1 Interface
Configuration
Settings
Description
BOOTP Client Select On or Off. At boot up, the device will attempt to obtain an IP address from a
BOOTP server.
Notes:
Overrides the configured IP address, network mask, gateway, hostname, and
domain.
When DHCP is On, the system automatically uses DHCP, regardless of whether
BOOTP Client is On.