Lantronix EDS8PR Server User Manual


 
EDS User Guide 75
10: Terminal and Host Settings
This chapter describes how to view and configure the Terminal Login Connect Menu and
associated Host configuration. It contains the following sections:
Terminal Settings
Host Configuration
The Terminal Login Connect Menu feature allows the EDS device to present a menu of predefined
connections when the device is accessed via telnet, ssh, or a serial port. From the menu, a user
can choose one of the presented options and the device automatically makes the predefined
connection.
The Terminal page controls whether a Telnet, SSH, or serial port connection presents the CLI or
the Login Connect Menu. By default, the CLI is presented when the device is accessed. When
configured to present the Login Connect Menu, the hosts configured via the Hosts page, and
named serial lines are presented.
Terminal Settings
This page shows configuration settings for each terminal connection method. You can configure
whether each serial line or the telnet/SSH server presents a CLI or a Login Connect menu when a
connection is made.
Line Terminal Configuration
To configure a specific line to support an attached terminal:
1. Select Terminal on the menu bar. The Terminal web page appears.
2. Select the line number at the top of the page connected to the terminal you want to configure.
The default is Line 1.
Figure 10-1 Terminal on Line Configuration
3. Enter or modify the following settings: