Lantronix EDS8PR Server User Manual


 
9: Line and Tunnel Settings
EDS User Guide 57
Tunnel – Accept Mode
Tunnel – Connect Mode
Tunnel – Disconnect Mode
Tunnel – Modem Emulation
The following sections describe the steps to view and configure specific tunnel number settings.
These instructions also apply to additional tunnel menu options.
Tunnel – Statistics
Displays statistics for the specific tunnel. For example, Completed Accepts, Completed Connects,
Disconnects, Dropped Accepts, Dropped Connects, etc. The EDS logs statistics for tunneling.
The Dropped statistic shows connections ended by the remote location. The Disconnects
statistic shows connections ended by the EDS.
To display statistics for a specific tunnel:
1. Select Tunnel on the menu bar. The Tunnel web page appears.
2. Select a tunnel number at the top of the page.
3. Select Statistics. The Tunnel Statistics page for the specific tunnel appears.
If a particular tunnel is connected, the following becomes available:
Identifying information about the tunnel connection (i.e., “Connect 1 Counters”)
Address of connection (i.e., “local:10001 -> 172.22.22.22.10001”)
Kill Connection(s) link: Click this link to terminate this active tunnel connection, as
desired.
Octets forwarded from Serial
Octets forwarded form Network
Uptime