Filter
Top Products
3: Getting Started
UDS2100 User Guide 18
Table 3-1. Current Configuration
Setting
Description
Name Configurable field. A name that identifies the UDS2100.
Double-click the field, type in the value, and press Enter
to complete. This name is not visible on other PCs or
laptops using DeviceInstaller.
Group Configurable field. A group name to categorize the
UDS2100. Double-click the field, type in the value, and
press Enter to complete. This group name is not visible
on other PCs or laptops using DeviceInstaller.
Comments Configurable field. Information about the UDS2100.
Double-click the field, type in the value, and press Enter
to complete. This description or comment is not visible
on other PCs or laptops using DeviceInstaller.
Device Family Displays the UDS2100’s device family type as UDS.
Type Displays the device type as UDS2100.
ID Displays the UDS2100’s ID embedded within the box.
Hardware Address Displays the UDS2100’s hardware (or MAC) address.
Firmware Version Displays the firmware currently installed on the UDS2100.
Extended Firmware
Version
Displays the full version nomenclature of the firmware.
Online Status Displays the UDS2100’s status as online, offline,
unreachable (the UDS2100 is on a different subnet), or
busy (the UDS2100 is currently performing a task).
Telnet Enabled Permits Telnet sessions.
Telnet Port Displays the UDS2100’s port for Telnet sessions.
Web Enabled Permits configuration through Web Manager.
Web Port Displays the UDS2100’s port for Web Manager
configuration.
Maximum Baud Rate
Supported
Displays the UDS2100’s maximum baud rate.
Note: The UDS2100 may not be running at this rate
currently.
Firmware Upgradeable Displays True, indicating the UDS2100’s firmware is
upgradeable as newer versions become available.
IP Address Displays the UDS2100’s current IP address. To change
the IP address, see Assigning an IP Address on page 16.
Number of COB
partitions supported
Displays the number of COB partitions supported.
Supports Dynamic IP Indicates whether the current IP address on the UDS2100
was set manually or assigned by DHCP.
Subnet Mask Displays the UDS2100’s current subnet mask. To change
the subnet mask, see Assigning an IP Address on page
16.