Filter
Top Products
4: Configuration Using Web Manager
UDS2100 User Guide 27
Figure 4-4. Hostlist Settings
2. Enter or modify the following fields:
Retry Settings
Retry Counter Enter the value for the number of times the UDS2100
should attempt to retry connecting to the host list. The
default setting is 3.
Retry Timeout Enter the duration (in seconds) the UDS2100 should
abandon attempting a connection to the host list. The
default setting is 250.
Host Information
Host Address Enter or modify the host’s IP address.
Port Enter the target port number.
3. When you are finished, click the OK button.
4. On the main menu, click Apply Settings.
Channel 1 and Channel 2 Configuration
Channel 1 and Channel 2 configurations define how the serial ports respond to
network and serial communication.
Serial Settings
To configure a channel’s serial settings:
1. From the main menu, click Serial Settings for either Channel 1 or Channel 2 to
display the Serial Settings page for the selected channel.