Filter
Top Products
Table 26. Removal steps of DC-in connector, fan, digitizer pen case, and pen switch assembly (continued)
Turn the system board over, and then disconnect the DC-in connector, the fan connector, and the pen switch
connector from the system board.
When installing: Make sure that the DC-in connector, the fan connector, and the Pen switch connector are attached
to the system board rmly.
Step Screw (quantity) Color
Torque
18
M2 × 3.5 mm, at-head, nylon-coated (1) Silver
0.181 Nm
(1.85 kgfcm)
Chapter 8. Removing and replacing a FRU 97