![](http://pdfasset.owneriq.net/f/e4/fe48c056-027d-4545-9dcf-ac42ba7b7f18/fe48c056-027d-4545-9dcf-ac42ba7b7f18-bg75.png)
Table 31. Removal steps of Micro-Processor card (continued)
3
M2 × 3 mm, height 5.5 mm, stud, nylon-coated (1)
Black 0.181 Nm
(1.85 kgfcm)
When installing: Make sure that the connector 5 is attached rmly.
2030 Inverter card
For access, remove these FRUs in order:
• “1020 Battery pack” on page 63
• “2010 LCD front bezel” on page 104
• “2020 Micro-Processor card” on page 107
Table 32. Removal steps of inverter card
Note: Some models do no have the inverter card.
Chapter 8. Removing and replacing a FRU 109