Filter
Top Products
Applying labels to the base cover:
The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the
base cover, you need to apply the following labels:
2
Homologation label
12
Product label
12a
Non-mercury label
Note: If the computer you are servicing is an LED-backlight LCD model, you need to paste this
label so that the notice for mercury on the product label is covered.
Following labels need to be peeled off from the old base cover, and need to be put on the new base cover.
1
Windows license label (COA)
3
MAC address label
4
IMEI label
5
Vodafone label
6
China modem label
7
FCC-ID label for wireless WAN
7a
FCC-ID label for wireless WAN and wireless LAN
8
FCC-ID label for wireless LAN
9
SIRIM label
10
FCC-ID label for digitizer
11
Serial number label
For some models, you need to apply two or three FCC labels, 7 or 8 and 10 . Check the old base cover; if it
has two or three FCC labels, nd duplicates of them in the label kit and apply them to the new base cover.
For the location of each label, refer the following gure:
Chapter 8. Removing and replacing a FRU 103