Filter
Top Products
Table 19. Removal steps of PCI Express Mini Card for wireless WAN (continued)
Step Screw (quantity) Color
Torque
3
M2 × 3.5 mm, wafer-head, nylon-coated (2) Silver
0.181 Nm
(1.85 kgfcm)
When installing: When you install the card, plug the red cable into the jack labeled MAIN on the card, and the blue
cable into the jack labeled AUX.
If the computer you are servicing is the wireless WAN-ready model, put the antenna cables in the cable protection
tube and place them as shown in this gure.
Chapter 8. Removing and replacing a FRU 81