Lenovo 336655U Laptop User Manual


 
System board serial number
Asset Tag
CPU Type
CPU Speed
Installed memory
UUID
MAC address (Internal LAN)
Cong menu
If you need to change the conguration of your computer, select Cong from the ThinkPad Setup program
main menu.
The following submenu is displayed:
Network: Set the LAN related functions.
USB: Enable or disable USB related functions.
Keyboard/Mouse: Set the keyboard and the mouse related functions.
Display: Specify the settings for display output.
Power: Set power management related functions.
Beep and Alarm: Enable or disable the audio related functions.
Serial ATA (SATA): Specify the settings for the hard disk drive.
CPU: Specify the settings for the CPU.
Notes:
The default settings are already optimized for you. If you consider changing the computer conguration,
proceed with extreme caution. Setting the conguration incorrectly might cause unexpected results.
On each submenu, you can enable a function by selecting Enabled, or disable it by selecting Disabled.
The following table shows the contents of the Cong menu.
Notes:
Some items are displayed on the menu only if the computer supports the corresponding features.
Default values are in boldface.
Table 4. Cong menu items
Menu item
Submenu item Selection Comments
Wake On LAN
Disabled
AC Only
AC and Battery
Enable the system to Power
on when the Ethernet
controller receives a magic
packet.
If you select AC Only, Wake
On LAN is enabled only
when ac power adapter is
attached.
If you select AC and
Battery, Wake On LAN is
Network
Chapter 7. Advanced conguration 95