Filter
Top Products
7. Insert two ngers into the holes in the two tabs on the front of the blue bracket. Then, press the tabs
towards each other and carefully slide the non-hot-swap hard disk drive out of the front of the chassis.
CPU
MEM
PSU
CPU
MEM
PSU
1
2
Figure64. Sliding the non-hot-swap hard disk drive out of the bay
8. Flex the sides of the blue bracket to remove the non-hot-swap hard disk drive from the bracket. Save
the bracket for future use.
Note: Do not touch the circuit board on the hard disk drive.
9. Reinstall the front system fan 1. See “Replacing the front system fan” on page 149.
Chapter 6. Installing, removing, or replacing hardware 127