Filter
Top Products
• Up to eight 2.5-inch hot-swap SAS hard disk drives with one backplane
The following illustration shows the locations of the hot-swap hard disk drive backplanes. You need to open
the server cover and remove the front system fans to access the backplanes. See “Removing the server
cover” on page 85 and “Replacing the front system fan” on page 149.
Notes:
1. Depending on the model, your server might look slightly different from the illustration in this topic.
2. The following illustration is based on ve to eight 3.5-inch hot-swap SATA or SAS hard disk drives
with two backplanes
1 .
Figure18. Hot-swap hard disk drive backplane locations
Backplane for 3.5-inch hot-swap hard disk drives
This topic provides information to help you locate the connectors on a 3.5-inch hot-swap hard disk drive
backplane.
Chapter 3. Product overview 35