Filter
Top Products
To install the sound function of the stereo model, follow these steps :
1 Insert the Option Diskette into the diskette drive.
2 Open File Manager, select the diskette drive, and double click
on the file SETUP.EXE.
3 Run Install Driver and Install Application according to the
instructions on the screen.
4 When the installation is complete, restart your computer.
For more information on how to use the stereo model, see
“Using Sound Functions (Stereo Model Only)” on page 2-34.
Optional Device Driver Settings
You can specify the following options for use with the CD-ROM drive
device driver:
DEVICE=C:\CD2X\PCMCD2X.SYS /I:nn /P:nnn /D:aaaaaaaa
/I:nn IRQ level. An IRQ number is assigned to the sound
function (decimal).
/P:nnn I/O base address. The sound function is mapped from
this address (hexadecimal).
/D:aaaaaaaa Device name. The name specified for the device
should be the same as for the MSCDEX.
Windows 95
This section contains installation instructions for the base model and
the stereo model separately. Follow the instructions for your model.
Attention
Do not interrupt the system during installation.
Close all other applications before installing the device driver.
Base Model
1 Turn on your computer.
2 After connecting the PC Card to the CD-ROM drive with the
interface cable, turn on the power switch of the CD-ROM drive.
Then insert the PC Card into the PC Card slot on your
computer.
3 The New Hardware Found dialog box is displayed. Follow
the instructions in the dialog box.
4 Insert the Option Diskette (provided) into the diskette drive.
5 Check that the diskette drive (for example, A:\) has been
selected; click on OK.
6 You may get a message stating that the driver on your system is
a newer version than the one on the Option Diskette. If this
Part 2: User's Guide 2-15