Filter
Top Products
If the field contains None:
For Warp Version 3: Select OTHER and go to step 9.
For Warp Version 4: Select IDE CD-ROM and go to step
9.
If the field does not contain None, go to step 8.
8 Close the System Configuration window.
If the message Installation is not completed. Select
Cancel to continue installing additional hardware or
software. Otherwise, select OK appears, click on OK.
Go to step 11.
9 Click on Install in the OS/2 Setup and Installation window.
Continue installation according to the instructions on the screen.
10 If a message appears telling you to restart your system, click on
OK.
11 Restart your computer.
You can now use the CD-ROM drive functions with OS/2 Warp.
Installing the Audio Device Driver (Stereo Model
Only)
Note
The sound function only works in the standard OS/2 environment;
it does not work in WIN-OS/2.
To install the software for the stereo model sound function, complete
the following steps:
1 Do one of the following, depending on your version:
Warp Version 3: Open OS/2 System, System Setup, and
Selective Install.
Warp Version 4: Open OS/2 System, System Setup,
Install/Remove, and Selective Install.
2 Do one of the following, depending on your version:
Warp Version 3: Click on OK in the System Configuration
window.
Warp Version 4: Click on Next in the System
Configuration window and then in the System
Configuration (cont.) window.
3 Check Multimedia Software Support in the OS/2 Setup and
Installation window.
For Warp Version 3: Click on Install.
2-20 20X Max Portable CD-ROM Drive