Filter
Top Products
3 Connect the CD-ROM drive to the speakers with the speaker
cables.
You can now clip the speakers to the sides of your laptop monitor, to
enhance your enjoyment of the stereo sound.
Using the CD-ROM Drive
Before using the unit as a CD-ROM drive, confirm the following:
Has the required software been installed? (See page 2-13.)
Is the power source connected? (See page 2-6.)
Keep the following points in mind before using the CD-ROM drive:
When removing the PC Card under Windows 95, open PC Card
in My Computer and select IBM IDE PC Card, then click on
the Stop button.
Windows NT does not support hot plugging (inserting the PC
Card while your computer is on). Turn on the CD-ROM drive
only after it has been connected to your computer; then start
Windows NT.
Some configurations might not allow using a PC Card and a
network card at the same time.
Perform the following steps to connect the CD-ROM drive to your
computer:
1 Turn on the computer.
2 Insert the PC Card into the PC Card slot of your computer
while the CD-ROM drive is on.
The 20X Max Portable CD-ROM Drive supports Plug and Play.
Once you have can use the drive simply by connecting the
CD-ROM drive to the PC Card and plugging in the PC Card.
2-30 20X Max Portable CD-ROM Drive