Filter
Top Products
Table 37. Removal steps of LCD bezel assembly (continued)
3
2
2
2
2
2
2
2
2
When installing: Make sure that all the latches are attached rmly.
2020 LED sub card
For access, remove these FRUs in order:
• “1010 Battery pack” on page 60
• “2010 LCD bezel assembly” on page 96
Table 38. Removal steps of LED sub card
Note: Some models do not have connector 1a .
2
1
1a
When installing: Make sure that the connectors are attached rmly and the card is installed as shown in this gure.
Chapter 9. Removing and replacing a FRU 97