Lenovo X120E Laptop User Manual


 
Chapter 2. Important service information
This chapter presents following important service information that applies to all machine types supported by
this manual:
“Strategy for replacing FRUs” on page 17
“Strategy for replacing a hard disk drive” on page 18
“Important notice for replacing a system board” on page 18
“How to use error message” on page 18
“Strategy for replacing FRUs for CTO, CMV, and GAV” on page 18
“Product denition” on page 18
“FRU identication for CTO, CMV, and GAV products” on page 19
Important: BIOS and device driver xes are customer-installable. The BIOS and device drivers are posted
on the customer support site http://www.lenovo.com/support.
System Disassembly/Reassembly videos that show the FRU removals or replacements for the Lenovo®
authorized service technicians are available in the following support site:
http://www.lenovoservicetraining.com/ion/
Advise customers to contact the Customer Support Center at 800-426-7378 if they need assistance in
obtaining or installing any software xes, drivers, and BIOS downloads.
Strategy for replacing FRUs
Before replacing parts:
Make sure that all software xes, drivers, and BIOS downloads are installed before replacing any FRUs
listed in this manual.
After a system board is replaced, ensure that the latest BIOS is loaded to the system board before
completing the service action.
To download software xes, drivers, and BIOS, do as follows:
1. Go to http://www.lenovo.com/support
2. Enter the product number of the computer or press Auto-detect button on the screen.
3. Select Downloads and drivers.
4. Follow the directions on the screen and install the necessary software.
Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs:
If you are instructed to replace a FRU but the replacement does not correct the problem, reinstall
the original FRU before you continue.
Some computers have both a processor board and a system board. If you are instructed to replace either
the processor board or the system board, and replacing one of them does not correct the problem,
reinstall that board, and then replace the other one.
If an adapter or a device consists of more than one FRU, any of the FRUs may be the cause of the error.
Before replacing the adapter or device, remove the FRUs, one by one, to see if the symptoms change.
Replace only the FRU that changed the symptoms.
Attention: The setup conguration on the computer you are servicing may have been customized. Running
Automatic Conguration may alter the settings. Note the current conguration settings (using the View
Conguration option); then, when service has been completed, verify that those settings remain in effect.
© Copyright Lenovo 2009, 2011
17