Filter
Top Products
Table 11. Removal steps of DIMM (continued)
Note: If the computer you are servicing has two DIMM slots and only one DIMM is used, the card must be installed
in SLOT-0 ( a ), but not in SLOT-1 ( b ). Some models only have one DIMM slot.
When installing: Insert the notched end of the DIMM into the socket. Press the DIMM rmly, and pivot it until it
snaps into the place. Make sure that it is rmly xed in the slot and does not move easily.
1050 PCI Express Mini Card for wireless LAN
For access, remove these FRUs in order:
• “1010 Battery pack” on page 50
• “1020 Bottom door” on page 51
Table 12. Removal steps of PCI Express Mini Card for wireless LAN
In step 1a and 1b , unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159) or pick the
connectors with your ngers and gently unplug them in direction of the arrow.
1a
1b
2
Step Screw (quantity) Color
Torque
2
M2 × 3 mm, small-head, nylon-coated (1) Silver
0.181 Nm
(1.85 kgfcm)
Chapter 8. Removing and replacing a FRU 57