Filter
Top Products
41
LevelOne MFP Control Center or server’s web pages to get it.
You will see that the MFP server will be displayed as the
default host name "FPS-3003" or the host name that you have
set.
6. If you can not find Workgroup name of MFP server in Microsoft
Windows Network, you can select Search Computer in My
Network Places and type the hostname of MFP server (ex,
default host name “FPS-3003” ) to find it.
7. Double click this host name icon. The folders will be displayed
as USB1_DxPx, and USB2_DxPx where Dx represents the
x-th disk and Px represents the x-th partition with respect to
USB1 port and USB2 port.
8. Double click the one of folders to open the folders over the
network.
6.5.2 Use Shared Storage by FTP Methods for Windows
i. Use Microsoft IE to the shared USB Mass Storages
1. Open Microsoft IE
2. In Web Address List, type command: “ftp://server’s host
name“ or “ftp://server’s IP address”. If you have changed the
default FTP port : 21 to the new value, you have to add the
new port number in the tail of command as “ftp://server’s
host name: ftp port” or “ftp://server’s IP address: ftp port”
3. If you clear Enable FTP Authentication in Set Supported
protocols, you login to the FTP server as anonymous login;
otherwise you have to type user name and password to login
to the server.
4. The shared folders will be listed in IE.
5. Perform Paste, Remove or Copy the files to the shared folders.
ii. Use Microsoft Dos’s FTP client
1. Type Dos command as “ftp”
2. Type “open server’s host name” or “open server’s IP address”.
If you have changed the default FTP port : 21 to the new value,
you have to add the new port number in the tail of command
as “open server’s host name ftp port” or “open server’s IP
address ftp port”