Filter
Top Products
58
in session number.
- Set Passive Mode: select or clear Set Passive
Mode support that FTP server can accept passive
mode.
- Enable FTP Authentication: select or clear Enable
FTP Authentication support. If you select the
support, you need to type user name and password
to login to the server. If you clear the support, you
enter the server as anonymous login.
Enable SANE (Scanner Access Now Easy) Server:
select or clear Enable SANE Server support. It is
enabled in Factory Default and users may set the
TCP port as follows:
- SANE Port: set SANE server’s TCP port (default:
6566)
User Accounts: You can change administrator name and
password or add a FTP user account. If you forgot
administrator name and password, you must to perform
Restore Factory Default action by pressing Init button and
plugging Power adaptor simultaneously. Please refer to
Chapter 13 Restore Factory Default.
Set Administrator
New Administrator: type your desired administrator
name.
New Password: type your desired password.
Retype Password: confirm your previous password
typing.
User Accounts list
User name: Administrator can add a new FTP user
account for accessing the storage attached to
FPS-3003.
Password: After entering the user name and
corresponding password, click “Add”. The account will
take effect once shown in the blank below.