Filter
Top Products
70
automatically search FPS-3003 on the LAN. Then FPS-3003's
IP address will be shown in control center.
4. Run any web browser, like Microsoft Internet Explorer. Go to
http://a.b.c.d to access FPS-3003's home page, where a.b.c.d
is FPS-3003's IP address.
5. Click "Maintenance" at the left side menu.
6. Login FPS-3003 with administrator "admin" and password
"admin".
7. Click "Upgrade Firmware".
8. Click "Browse" button to choose the file of new FPS-3003
firmware.
9. Click "Upload" button to start firmware upgrade.
10. Wait about 15 seconds for system reboot.
Procedure C: Using Init Button and TFTP Client
1. Simultaneously press Init button and power on (plug the power
adaptor line) the server until LED indicators of Power, USB1 and
USB2 blink. After that, the servers will operate using the
factory default values after next restarts.
2. Start the TFTP client Tool which contains in the CD-Rom: Image
Burner
3. Type the server’s Fallback IP address: 192.168.1.100 and click
Open Image to open your new firmware.
4. Click Upload Image