LevelOne WAP-0005 Webcam User Manual


 
Wireless Access Point User Guide
Authentication
Normally, you can leave this at “Automatic”, so that Wireless Stations
can use either method ("Open System" or "Shared Key".).
If you wish to use a particular method, select the appropriate value -
"Open System" or "Shared Key". All Wireless stations must then be set
to use the same method.
Key Input
Select "Hex" or "ASCII" depending on your input method. (All keys
are converted to Hex, ASCII input is only for convenience.)
Key Value
Enter the key values you wish to use. The default key, selected by the
radio button, is required. The other keys are optional. Other stations
must have matching key values.
Passphrase
Use this to generate a key or keys, instead of entering them directly.
Enter a word or group of printable characters in the Passphrase box
and click the "Generate Key" button to automatically configure the
WEP Key(s). If encryption strength is set to 64 bit, then each of the
four key fields will be populated with key values. If encryption
strength is set to 128 bit, then only the selected WEP key field will be
given a key value.
Radius MAC
Authentication
The current status is displayed.
Click the "Configure" button to configure this feature if required.
See page 21 for details on using Radius MAC authentication.
UAM
The current status is displayed.
Click the "Configure" button to configure this feature if required.
See page 23 for details on using UAM.
26