Filter
Top Products
Wireless Access Point User Guide
Parameters
Disassociated Timeout
This determines how quickly a Wireless Station will be consid-
ered "Disassociated" with this AP, when no traffic is received.
Enter the desired time period.
Fragmentation
Enter the preferred setting between 256 and 2346.
Beacon Interval
Enter the preferred setting between 0 and 3000.
RTS/CTS Threshold
Enter the preferred setting between 256 and 2346.
Preamble Type
Select the desired preamble type.
Output Power Level
Select the desired power output. Higher levels will give a
greater range, but are also more likely to cause interference with
other devices.
Antenna Selection
If your Access Point has only 1 antenna, there is only 1 option
available. If your Access Point has 2 antennae, select the option
which gives the best results in your location.
802.11b (2.4GHz only)
Protection Type
Select the desired option.
Short Slot Time
Enable or disable this setting as required.
Protection Mode
Normally, this should be left at "Auto".
Protection Rate
Select the desired option.
34