Setup
Security Settings - 802.1x
This uses the 802.1x standard for client authentication, and WEP for data encryption. If possi-
ble, you should use WPA-802.1x instead, because WPA encryption is much stronger than
WEP encryption.
If this option is selected:
• This Access Point must have a "client login" on the Radius Server.
• Each user must have a "user login" on the Radius Server.
• Each user's wireless client must support 802.1x and provide the login data when required.
• All data transmission is encrypted using the WEP standard. You only have to select the
WEP key size; the WEP key is automatically generated.
Figure 19: 802.1x Wireless Security
Data - 802.1x Screen
802.1x
Radius Server Address
Enter the name or IP address of the Radius Server on your
network.
Radius Port
Enter the port number used for connections to the Radius
Server.
Client Login Name
This read-only field displays the current login name, which is
the same as the name of the Access Point. The Radius Server
must be configured to accept this login.
31