Filter
Top Products
Appendix E – Command Line Interface
set dhcpMode -- Set Dhcp Mode
set domainsuffix -- Set Domain Name Server Suffix
set dtim -- Set Data Beacon Rate (DTIM)
set enableANI -- Turn Adaptive Noise Immunity Control On/Off
set encryption -- Set Encryption Mode
set extendedchanmode -- Set Extended Channel Mode
set factorydefault -- Restore to Default Factory Settings
set firStepLvl -- Set ANI Parameter for FirStepLevel
set fragmentthreshold -- Set Fragment Threshold
set frequency -- Set Radio Frequency (MHz)
set gateway-- Set Gateway IP Address
set gbeaconrate -- Set 11g Beacon Rate
set groupkeyupdate -- Set Group Key Update Interval (in Seconds)
set gdraft5-- Set 11g Draft 5.0 compatibility
set hostipaddr -- Set Host IP address
set ipaddr -- Set IP Address
set ipmask -- Set IP Subnet Mask
set key -- Set Encryption Key
set keyentrymethod -- Select Encryption Key Entry Method
set keysource -- Select Source Of Encryption Keys
set login -- Modify Login User Name
set minimumrate -- Set Minimum Rate
set macAuth-- Set Mac Authentication Enable/Disable
set nameaddress -- Set Name Server IP address
set noiseImmunityLvl -- Set ANI Parameter for Noise Immunity Level
set ofdmTrigHigh -- Set Higher Trigger Threshold for OFDM Phy Errors for ANI Control
set ofdmTrigLow -- Set Lower Trigger Threshold for OFDM Phy Errors for ANI Control
set ofdmWeakSigDet -- Set ANI Parameter for OFDM Weak Signal Detection
set overRidetxpower -- Set Tx power override
set operationMode-- Set operation Mode
set password -- Modify Password
set passphrase -- Modify Passphrase
set pktLogEnable -- Enable Packet Logging
set power -- Set Transmit Power
set quietAckCtsAllow -- Allow Ack/Cts frames during quiet period
set quietDuration-- Duration of quiet period
set quietOffset -- Offset of quiet period into the beacon period
89