Wireless Access Point User Guide
get fragmentthreshold -- Display Fragment Threshold
get frequency -- Display Radio Frequency (MHz)
get gateway-- Display Gateway IP Address
get gbeaconrate -- Display 11g Beacon Rate
get gdraft5-- Display 11g Draft 5.0 compatibility
get groupkeyupdate -- Display Group Key Update Interval (in Seconds)
get hardware -- Display Hardware Revisions
get hostipaddr -- Display Host IP Address
get ipaddr -- Display IP Address
get ipmask -- Display IP Subnet Mask
get key -- Display Encryption Key
get keyentrymethod -- Display Encyrption Key Entry Method
get keysource -- Display Source Of Encryption Keys
get login -- Display Login User Name
get minimumrate -- Display Minimum Rate
get macAuth-- Display Mac Authentication Enable/Disable
get nameaddr -- Display IP address of name server
get nf -- Display Noise Floor
get noiseImmunityLvl -- Display ANI Parameter for Noise Immunity Level
get ofdmTrigHigh -- Display Higher Trigger Threshold for OFDM Phy Errors for ANI Con-
trol
get ofdmTrigLow -- Display Lower Trigger Threshold for OFDM Phy Errors for ANI Con-
trol
get ofdmWeakSigDet -- Display ANI Parameter for OFDM Weak Signal Detection
get overRidetxpower -- Display Tx power override
get operationMode-- Display Operation Mode
get pktLogEnable -- Display Packet Logging Mode
get power -- Display Transmit Power Setting
get quietAckCtsAllow -- Display if Ack/Cts frames are allowed during quiet period
get quietDuration-- Display Duration of quiet period
get quietOffset -- Display Offset of quiet period into the beacon period
get radiusname -- Display RADIUS server name or IP address
get radiusport -- Display RADIUS port number
get rate -- Display Data Rate
get remoteAp -- Display Remote Ap's Mac Address
get hwtxretries -- Display HW Transmit Retry Limit
get swtxretries -- Display SW Transmit Retry Limit
86