Filter
Top Products
Loading paper and various paper types
Loading paper
1 Make sure:
• You use paper designed for inkjet printers.
• The paper is not used or damaged.
• If you are using specialty paper, you follow the instructions that came with it.
• You do not force paper into the printer.
2 Load the paper vertically against the right side of the paper support.
3 Adjust the paper guide until it rests against the left edge of the paper.
Note: To avoid paper jams, make sure the paper does not buckle when you adjust the paper guide.
Loading various paper types
Load up to Make sure
100 sheets of plain paper (depending on
the thickness)
• The paper is designed for use with inkjet printers.
• The paper is loaded against the right side of the paper support.
• The paper guide rests against the left edge of the paper.
25 sheets of heavyweight matte paper
25 sheets of glossy paper
25 sheets of photo paper
• The stack of heavyweight matte paper does not exceed 10mm or 1
cm in height.
• The glossy or printable side of the paper faces you. (If you are not
sure which side is the printable side, see the instructions that came
with the paper.)
• The paper is loaded against the right side of the paper support.
• The paper guide rests against the left edge of the paper.
Note: Photos require more drying time. Remove each photo as it exits,
and allow it to dry to avoid ink smudging.
10 iron-on transfers
• You follow the loading instructions that came with the iron-on
transfers.
• The print side of the transfers faces you.
• The transfers are loaded against the right side of the paper support.
• The paper guide rests against the left edge of the transfers.
Note: For best results, load transfers one at a time.
21