Lexmark 19Z0101 Printer User Manual


 
Menu item Description
Portrait Width
3–17 inches
76–432 mm
Sets the portrait width
Notes:
If the width exceeds the maximum, the printer uses the maximum
width allowed.
11.69 inches is the US factory default setting. Inches can be
increased in 0.01inch increments.
297 mm is the international factory default setting. Millimeters can
be increased in 1mm increments.
Portrait Height
3–17 inches
76–432 mm
Sets the portrait height
Notes:
If the height exceeds the maximum, the printer uses the maximum
height allowed.
17 inches is the US factory default setting. Inches can be increased in
0.01inch increments.
432 mm is the international factory default setting. Millimeters can
be increased in 1mm increments.
Feed Direction
Short Edge
Long Edge
Specifies the feed direction if the paper can be loaded in either direction
Notes:
Short Edge is the factory default setting.
Long Edge appears only if the longest edge is shorter than the
maximum width supported in the tray.
Bin Setup menu
Menu Item Description
Output Bin
Standard Bin
Bin <x>
Specifies the default output bin
Note: Standard Bin is the factory default setting.
Understanding printer menus 139