4 Navigate to:
Paper Size list > select your paper size
If no paper size matches the label sheet size, then set a custom size.
5 Click OK to close any printer software dialogs.
6 Click OK or Print.
For Macintosh users
1 With a document open, choose File > Page Setup.
2 From the “Format for” pop-up menu, choose your printer.
3 From the Paper Size pop-up menu, choose your paper size.
If no paper size matches the label sheet size, then set a custom size.
4 Select an orientation, and then click OK.
5 From the menu bar, choose File > Print.
6 From the Printer pop-up menu, choose your printer.
7 From the print options pop-up menu, choose Print Settings or Quality & Media.
8 From the Paper Type pop-up menu, choose Card Stock.
9 From the Print Quality menu, choose a print quality other than Quick Print or Draft.
10 Click Print.
Tips on loading label sheets
• Make sure the top of the label sheet feeds into the printer first.
• Make sure the adhesive on the labels does not extend to within 1 mm of the edge of the label sheet.
• Make sure the paper guide or paper guides rest against the edges of the label sheet.
• Use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel off during printing,
resulting in a paper jam.
Printing on custom-size paper
For Windows users
1 With a document open, click File > Print.
2 Click Properties, Preferences, Options, or Setup.
3 Navigate to:
Print Setup tab > Paper Size list > select Custom Size
4 Adjust the settings as needed to create a custom size, and then click OK.
5 Click OK to close any printer software dialogs.
6 Click OK or Print.
Printing
36