Filter
Top Products
38
Maintenance
Replacing print cartridges
The Lexmark 3100 Series uses the following cartridges:
Note: In order to print, two cartridges must be installed. Either
a black or photo cartridge may be used with the color
cartridge.
For information about ordering supplies, see Maintenance on page 20.
Removing the used cartridges
1 Make sure the AIO is on.
2 Lift the scanner unit until the scanner support keeps it open.
The print cartridge carrier moves and stops at the loading position
unless the AIO is busy.
3 Pull the top of the cartridge toward you until you hear a snap.
4 Remove the old cartridges. Store them in an air-tight container or
dispose of them (see page 43).
Note: Use the cartridge storage unit that was packaged with
your photo cartridge to store cartridges for future use.
Left cartridge carrier Right cartridge carrier
19 (Color) 48 (Black)
20 (Color) 50 (Black)
25 (Color) 55 (Black)
90 (Photo)