Filter
Top Products
40
Specifying cartridge settings in the printer software
Before you specify the print cartridge settings in the printer software, install
the cartridges. For help, see “Installing the cartridges” on page 39.
1 Open the Lexmark Solution Center (see page 19).
2 From the Maintenance tab, click Install a new print cartridge.
3 Select the type of cartridge you installed.
Note: Specify whether the cartridge is a new cartridge or an
old cartridge (one that has been used before). If an old
cartridge is incorrectly identified as new cartridge in the
Lexmark Solution Center, ink levels may be incorrect.
4 Click OK or Next.
5 If you installed a new cartridge, continue with “Aligning the print
cartridges.”
Aligning the print cartridges
You should align your print cartridges after installing cartridges to improve
print quality.
To align the print cartridges:
1 Load plain paper (see page 8).
2 Open the Lexmark Solution Center (see page 19).
3 From the Maintenance tab, click Align to fix blurry edges.
4 Click Print.
An alignment page prints automatically, aligning your print
cartridges.