Filter
Top Products
51
Edge of the copy does not print
Make sure:
• The original is properly oriented on the glass (see page 11).
• The area you want to copy is not larger than the printable area of
the page. Apply the Fit-to-page feature.
To apply the Fit-to-page feature:
1 Open the Lexmark All-In-One Center (see page 13).
2 From the Copy section, click See More Copy Settings.
3 From the Reduce/Enlarge section, click the second button, and
then select Fit to page from the corresponding drop-down
menu.
4 Copy your document again.
Copy button on the control panel does not work
Make sure:
1 The computer is on. The power light must be on in order for the AIO
to work.
2 The USB cable is securely attached to the computer and the AIO.
3 You properly installed the software. For help, refer to the setup
documentation. The software must be installed for the copier to
function.
4 The Lexmark 3100 Series All-In-One quick launch icon in the lower
right of your screen is present and a red “X” is not present. If a red
“X” is present, remove and install the software again (see page 53).
Note: If the Lexmark 3100 Series quick launch icon does not
appear in the lower right of your screen, open the
All-In-One Center (see page 13).