Filter
Top Products
Menu item Description
Download Target
RAM
Flash
Sets the storage location for downloads
Notes:
• RAM is the factory default setting.
• Storing downloads in flash memory places them in permanent
storage. Downloads remain in flash memory even when the
printer is turned off.
• Storing downloads in RAM is temporary.
• This menu appears only if a flash option is installed.
Resource Save
Off
On
Specifies how the printer handles temporary downloads, such as
fonts and macros stored in RAM, when the printer receives a job
that requires more memory than is available
Notes:
• Off is the factory default setting. Off sets the printer to retain
the downloads only until memory is needed. Downloads are
deleted in order to process print jobs.
• The On setting retains the downloads during language changes
and printer resets. If the printer runs out of memory, 38
Memory Full appears, and downloads are not deleted.
Finishing menu
Menu item Description
Sides (Duplex)
1 sided
2 sided
Specifies whether duplex (2-sided) printing is set as the default for all print jobs
Notes:
• 1 sided is the factory default setting.
• To set 2-sided printing from the software program: for Windows users, click
File Print, and then click Properties, Preferences, Options, or Setup; for
Macintosh users, choose File > Print, and then adjust the settings from the Print
dialog and pop-up menus.
Duplex Binding
Long Edge
Short Edge
Defines the way duplexed pages are bound and how the printing on the back of the
page is oriented in relation to the printing on the front of the page
Notes:
• Long Edge is the factory default setting.
• Long Edge specifies that binding be placed on the left edge of portrait pages and
the top edge of landscape pages.
• Short Edge specifies that binding be placed on the top edge of portrait pages and
the left edge of landscape pages.
Copies
1–999
Specifies a default number of copies for each print job
Note: 1 is the factory default setting.
Understanding printer menus
84