Filter
Top Products
103
12
Press Go to reset the transfer belt counter.
Once the counter is reset, the Printing Alignment Page message appears and a test page
prints. After the test page has printed, you are prompted to enter alignment values for each
setting.
13 Press Menu to choose the alignment value.
14 Press Select to enter the value and continue to the next value.
After you have entered values for each alignment setting, the transfer belt should be aligned
and the printer ready to print.
Note: If you replaced the transfer belt after receiving the 80 Belt/Fuser
Life Warning message or the 80 Belt/Fuser Exhausted message, see
Replacing the fuser for instructions on replacing the fuser.
For instructions about replacing other supply items, click one of the following headings:
Replacing a photodeveloper
Replacing a toner cartridge
Replacing the fuser
Replacing the oil coating roll