Filter
Top Products
95
29
Replacing the transfer belt
Your printer monitors the life of your transfer belt. When the transfer belt reaches the end of its life, the
printer displays 80 Belt Exhausted. This message indicates it is time for you to replace the transfer
belt. For best print quality, make sure you replace the transfer belt when the printer displays 80 Belt
Life Warning.
Press
Go to clear the message. The Supplies message appears on the second line of the display to
remind you that supplies need attention. You can open the Supplies Menu to see 80 Belt Exhausted
or 80 Belt Life Warning messages.
The printer continues to display the
Supplies message until you replace the transfer belt. To replace
the transfer belt, use the following steps or the instruction sheet supplied with the transfer belt.
Preparing for maintenance
1 Turn the printer on.
2 Follow the instructions in the table for the message your printer is displaying.
The Preparing for Maintenance message appears while the printer moves parts into
position. After the parts are in position, the message Printer Ready for Maintenance
appears, followed by Power Off to Replace Items.
3 Turn the printer off.
Primary message Secondary message What you should do
80 Belt Life Warning Select = Replace
Go = Continue
Press Select if you want to
replace the transfer belt now.
Press Go if you want to wait to
replace the transfer belt.
80 Belt Exhausted Select = Replace Press Select to replace the
transfer belt.
80 Belt/Fuser Life Warning Select = Replace
Go = Continue
Press Select if you want to
replace the transfer belt now.
Press Go if you want to wait to
replace the transfer belt.
80 Belt/Fuser Exhausted Select = Replace Press Select to replace the
transfer belt.