Filter
Top Products
82
27
Replacing the fuser
Your printer monitors the life of your fuser. When the fuser reaches the end of its life, the printer
displays 80 Fuser Exhausted. This message indicates it is time for you to replace the fuser. For best
print quality, make sure you replace the fuser when the printer displays 80 Fuser Life Warning.
Press
Go to clear the message. The Supplies message appears on the second line of the display to
remind you that supplies need attention. You can open the Supplies Menu to see the 80 Fuser
Exhausted and 80 Fuser Life Warning messages.
The printer continues to display the
Supplies message until you replace the fuser. To replace the
fuser, use the following steps or the instruction sheet supplied with the fuser.
Preparing for maintenance
1
Turn the printer on.
2 Follow the instructions in the table for the message your printer is displaying.
The Preparing for Maintenance message appears while the printer moves parts into
position. After the parts are in position, the message Printer Ready for Maintenance
appears, followed by Power Off to Replace Items.
3 Turn the printer off.
Removing the fuser
1
Complete the steps in Preparing for maintenance on page 82.
2 Make sure the printer is turned off.
Primary message Secondary message What you should do
80 Fuser Life Warning Select = Replace
Go = Continue
Press Select if you want to
replace the fuser now.
Press Go if you want to wait to
replace the fuser.
80 Fuser Exhausted Select = Replace Press Select to replace the fuser.
80 Belt/Fuser Life Warning Select = Replace
Go = Continue
Press Select if you want to
replace the fuser now.
Press Go if you want to wait to
replace the fuser.
80 Belt/Fuser Exhausted Select = Replace Press Select to replace the fuser.